Skip to main content

Front Headlight Clearance Marker Light Replacement Mitsubishi Mirage

This guide provides instructions on how to replace the front headlight clearance marker light of the Mitsubishi Mirage G4.

Front Headlight Clearance Marker Light Replacement Mitsubishi Mirage
ESTIMATED TIME 5 mins
DIY COST $ 6 - 15
DIFFICULTY Very Easy

What you will need

Procedure

  1. Open the hood. Pull the hood release under the dashboard and go to the front of the vehicle. Then unlock the hood latch and pull the hood up. Use the hood lift to hold the hood up.Opened hood of the Mitsubishi Mirage.

     

  2. Find the clearance marker adapter located behind the headlight.Clearance marker adapter on the headlight.

     

  3. Remove the adapter from the headlight. Twist the adapter counterclockwise and pull it out from the headlight.Removing the front headlight clearance marker adapter.

     

  4. Remove the light bulb from the adapter by pulling the light bulb out.Removing the light bulb to the adapter.

     

  5. Install the new light bulb. Push the light bulb into the clearance marker adapter.Installing the new clearance marker light bulb in.

     

  6. Reinstall the clearance marker adapter to the headlight. Put the adapter back to the headlight and twist it clockwise to lock it in.Reinstalling the light bulb adapter to the headlight.

    Check the light bulb by turning on the light on your vehicle.

Comments

Add new comment

Plain text

Front Headlight Clearance Marker Light Replacement Mitsubishi Mirage This guide provides instructions on how to replace the front headlight clearance marker light of the Mitsubishi Mirage G4.