Skip to main content

Headlight Replacement Mitsubishi Mirage G4

This guide provides instructions on how to replace the headlight of the Mitsubishi Mirage G4.

ESTIMATED TIME 15 - 20 mins
DIY COST $ 80 - 120
DIFFICULTY Very Easy

Watch Video

What you will need

Procedure

  1. Open the hood. Go to the driver's seat and pull the hood release below the dashboard. Then unlock the hood latch and pull the hood up. Use the supporting rod to hold the hood up.Opened hood of the Mitsubishi Mirage.
  2. Remove the push pins on the side of the front bumper to gain access to the screw holding the light. Then remove the screw using a screwdriver and turn it counterclockwise.Removing the push clips on the front bumper.
  3. Remove the bolts holding on to the headlight, use a socket wrench, and turn it counterclockwise. Remove the bolts on the bumper support bracket to easily remove the headlight.Bolts holding on to the headlight of the Mitsubishi Mirage.

    The other bolt on the headlight is located below the bumper support bracket.

  4. Disconnect the headlight connectors. Squeeze the tab on both sides and pull the connector out.

    Remove the connectors connected to the headlight.

     

  5. Remove the headlight by pulling it out gently. Move the front bumper away to easily remove the headlight.

    Removing the headlight of the Mitsubishi Mirage.
  6. Put the new headlight back in. Set the headlight in and line up the holes to where you will install the bolts.Installing the new headlight of the vehicle.
  7. Reinstall the bolts and screws holding on to the headlight. Then put the push pins back into the side of the front bumper.Reinstalling the bolts and screws holding on to the headlight.
  8. Reconnect the connectors back to the headlight. Simply push the connector into its original position.Reinstalling the connectors back to the headlight.
Headlight Replacement Mitsubishi Mirage G4 This guide provides instructions on how to replace the headlight of the Mitsubishi Mirage G4.