Hyundai Elantra Marker Light Bulb Replacement Guide

What you will need

• T10 Light Bulb
• 10mm wrench

Procedure

1. Open trunk
2. Remove rear tail light assembly Open the rear service cover. You will notice three 10 mm bolts. Remove all the bolts. Disconnect the electrical wire connector. Pull out the tail light assembly.
3. Change side marker light bulb. Twist the side marker socket counterclockwise to remove it from the headlight assembly. Pull out the light bulb. Install the new light bulb. Reinstall the socket into the brake light assembly. Line up the three tabs with the slots found on the tail light assembly. Insert the side marker socket and twist it.
4. Reinstall the tail light assembly. Tighten the three 10 mm bolts. Close the service cover. Make sure to reconnect the electrical wire before you close the service cover.