Skip to main content

Interior Map & Dome Light Bulb Replacement Honda Fit 2007-2013

Step-by-step procedure on how to replace the dome light of the 2007-2013 Honda Fit 2nd Gen.

Interior Map & Dome Light Bulb Replacement Honda Fit 2007-2013
ESTIMATED TIME 10 - 15 mins
DIY COST $ 5 - 15
DIFFICULTY Very Easy

What you will need

Procedure

  1. Unlock the vehicle and go to the front seat.
  2. Locate the map light near the rearview mirror.The Map light of the 2011 Honda Fit.

     

  3. Remove the lampshade cover by inserting a prying tool or flat screwdriver and using it to push the cover out.Removing the lampshade cover of the map light.

     

  4. Remove the light bulb by pulling it out. Use latex gloves. Removing the light bulb of the map light.

     

  5. Line up the new light bulb and push it in to lock it into place.The new map light bulb of the 2011 Honda Fit.

     

    Installing the new map light of the vehicle.
  6. Check the new light bulb by switching it on.
  7. Line up the lampshade cover and push it until it snaps into place.Installing the lampshade back to the map light.

     

  8. Go to the back seat and locate the dome light on top.The dome light of the 2011 Honda Fit.

     

  9. Remove the lampshade cover using a flat screwdriver or prying tool to pop out the cover.Prying out the dome light lampshade cover.

     

    Removing the lampshade cover of the dome light.
  10. Pull the light bulb out.Pulling the light bulb out.

     

  11. Line up the new light bulb and push it in to lock it into place.The new light bulb of the dome light.

     

  12. Check the new light bulb by switching on the dome light.Testing the new dome light.

     

  13. Line up the lampshade cover and push it until it snaps back into place.Reinstalling the lampshade cover of the dome light.

     

Comments

Add new comment

Plain text

Interior Map & Dome Light Bulb Replacement Honda Fit 2007-2013 Step-by-step procedure on how to replace the dome light of the 2007-2013 Honda Fit 2nd Gen.