Skip to main content

Jump Starting Mazda 3 2013-2018

Step-by-step procedure on how to jump-start on a 2013-2018 Mazda 3.

ESTIMATED TIME 5 - 10 mins
DIY COST $ 0
DIFFICULTY Very Easy

Watch Video

What you will need

Procedure

  1. Remove the emergency key from the key fob and use it to unlock the driver's door. 
  2. Unlock the vehicle and pull the hood release under the dashboard.Pulling the hood release to pop out the hood.

     

  3. Locate the hood latch on the vehicle's front and slide the tab to the right to unlock it.The hood latch of the 2016 Mazda 3.

     

  4. Pull the hood and place the hood strut to hold the hood.Setting the hood strut to hold the hood.

     

  5. Locate the battery on the driver's side of the engine compartment.Connecting the red jumper cable to the positive terminal of the battery.

     

  6. Connect the red jumper cable to the positive terminal of the battery.Connecting the red jumper cable to the positive terminal of the battery.

     

  7. Connect the black jumper cables to the ground terminal of the vehicle.Connecting the black jumper cable to the ground terminal of the vehicle.

     

  8. Wait for a few minutes and let the battery recharge.
  9. Start the vehicle.
Jump Starting Mazda 3 2013-2018 Step-by-step procedure on how to jump-start on a 2013-2018 Mazda 3.