| › Kia

Kia Key Battery Replacement

Learn how to change the key fob battery on any Kia remote.

Battery Size: CR2032 Battery


Kia Sorento Key Fob Battery Replacement Step 1: Press on the release tab. 
Kia Rio Key Fob Battery ReplacementStep 2: Pull out the metal key. 
kia key battery size Step 3: Use a flat screwdriver to pry open the case. 
open kia key to change battery

Step 4: Seperate the Kia key case. 
location of key batteryStep 5: Remove the old battery. 
how to change kia battery Step 6: Install new Kia key fob battery. 
kia smart key battery replacemenet Step 7: Press the key shell to close. 
diy kia key battery changeStep 8: Insert the metal key blade. 

Battery Size:  CR2032 Battery Type

How to replace the battery on Kia Type A Key Fob Remote

  1. Pry open the back cover of the Kia remote. 
  2. Use a small object to pop out the battery from your Kia remote. Pay close attention to the orientation of the battery. Note the + symbol on the battery. 
  3. Install new battery. Make sure the positive (+) is facing you. 
  4. Push the back cover back into the remote until you hear it snap in place. 

Replacing the battery in Kia key fob is very easy and takes only five minutes. Make sure you have the correct battery size. Test the keyfob to make sure it works to lock and unlock your Kia. If your Kia key remote doesn't work after you replace the battery make sure that the battery is not installed upside down. 

These instructions will help Kia owners who need help with tasks such as:

  • Kia Optima Key Battery Replacement
  • Kia Forte Keyless Remote Battery Replacement
  • Kia Sorento Key Fob Battery Replacement
  • Kia Rio Key Fob Battery Replacement

 

Comments

I regularly google for self-help youtube videos. I just watched video #1 and it is the best instructional video that I have ever seen. I has everything you need to know and nothing extra. Granted, it's a pretty simple task, but the video made it so easy to follow along. I wish all videos were like this. Thanks.

Phil Lewin, 2018-04-17

You don't need to use a screw driver with this type of fob as the end of the metal key has a flat edge which is ideal for popping off the cover!

Justin, 2019-05-11

Will the key need to be programmed again for the car?

Todd, 2019-05-14

It should work without having to do anything special (other than replace the battery).

roy kilburn, 2019-11-02

I HAVE A 2007 KIA SEDONA, MY KEY OPENS MY CAR BUT 'THE HORN DOESN'T BEEP., WHEN I PRESS THE KEY TO LOCK THE CAR..WHAT DO I LOOK FOR TO MAKE IT BEEP.

By YOUCANIC on May 14, 2019

Vehicle

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.