Skip to main content

Kia Key Fob Battery Replacement

This guide provides step-by-step instructions on how to change the battery in any Kia key fob remote. 

Scroll down to find the video that applies to your Kia. 

Kia Key Fob Battery Replacement
ESTIMATED TIME 5 min
DIY COST $5-$10
DIFFICULTY Very Easy

 

How to change the battery on Kia smart key fob? 

Battery Size: CR2032 Battery

Press on the release tab. Kia Sorento Key Fob Battery Replacement

Pull out the metal key.      Kia Rio Key Fob Battery Replacement

Use a flat screwdriver to pry open the case.  kia key battery size

Separate the Kia key case.     open kia key to change battery

Remove the old battery .         location of key battery

Install new Kia key fob battery. how to change kia battery

Press the key shell to close.    kia smart key battery replacemenet

Insert the metal key blade.       diy kia key battery change

How to change the battery on the Kia flip key? 

Battery Size: CR2032 Battery Type

  1. Pry open the back cover of the Kia remote.
  2. Use a small object for popping out the battery from your Kia remote. Pay close attention to the orientation of the battery. Note the + symbol on the battery.
  3. Install a new battery. Make sure the positive (+) is facing you.
  4. Push the back cover back into the remote until you hear it snap in place.

How to change the key fob battery on a Kia? 

Battery type: CR2032 

  1. Pry open the key fob using a flathead screwdriver.  This will expose the battery. 
  2. Remove the battery from the circuit board. 
  3. Press the new battery in and close the key by pressing the two halves together. 
  4. Test the battery. 

Can I change a Kia key battery myself? 

Yes. Replacing the battery in the Kia key fob is very easy and takes only five minutes. Make sure you have the correct battery size. Test the keyfob to make sure it works to lock and unlock your Kia. If your Kia key remote doesn't work after replacing the battery, make sure that the battery is not installed upside down.

Do I have to reprogram my Kia key fob when I change the battery? 

No. Your keyfob will even after you replace the fob battery. 

What Kia models do these instructions apply to? 

These instructions will help you replace the key fob battery on a Kia Optima, Forte, Rio, Sedona, Soul, Sorento, etc.

Comments

I regularly google for self-help youtube videos. I just watched video #1 and it is the best instructional video that I have ever seen. I has everything you need to know and nothing extra. Granted, it's a pretty simple task, but the video made it so easy to follow along. I wish all videos were like this. Thanks.

Visitor

I HAVE A 2007 KIA SEDONA, MY KEY OPENS MY CAR BUT 'THE HORN DOESN'T BEEP., WHEN I PRESS THE KEY TO LOCK THE CAR..WHAT DO I LOOK FOR TO MAKE IT BEEP.

Visitor

You don't need to use a screw driver with this type of fob as the end of the metal key has a flat edge which is ideal for popping off the cover!

Visitor

Will the key need to be programmed again for the car?

Visitor

It should work without having to do anything special (other than replace the battery).

Visitor

I don't think that the key fob has altered the horn setting, in my over 40 years in the car trade this is enabled and disabled through your car menu settings this should be fully explained in your vehicle handbook.

Visitor

I have a 2013 kia forte koup and my keyless remote does not match the tutorial. Do you have one for part number U8560

Visitor

2013 Kia had battery changed at store and still the car will not open or start?? help

Visitor

I've seen 2 diff. Y'Tubes on this. One shows the battery writing faces AWAY from you as you work inside the fob, and makes a point of doing that. This one shows the writing FACING you as you replace it. Written texts say to put the writing "facing up"... hmmm, is up the face of the fob when you are using it pressing the buttons? Facing up at you as you look at the insides? I know I'm splitting hairs, but I wonder if it makes a difference at all? I have a 2016 Kia Sportage, and when I opened the fob, I was seeing the BACK of the battery, the non-written side. The first Y"Tube I watched said this was correct, seeing the back of the battery, writing no longer visible once I put it in. In both cases, I was surprised because manufacturers like their name to be visible. I use that smooth surface to write on it the date of install with a sharpie, as I do with all of my batteries. But I am damned curious, 2 Y'Tubes, 2 different placements. My fob works now just fine, BTW.

Visitor

Does the led light always blink red or is it green when the battery is new?

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes