The recommended type is listed in your owner’s manual.
Risk of getting burned.
Do not open a coolant cap if the engine is still hot.
Park the vehicle, turn off the engine, and allow it to cool down.
Start by pulling the release lever located under the dashboard, driver's side.
Press the safety lever under the hood and open the hood..
Locate the engine coolant reservoir in the engine bay.
Check the coolant level on the body of the coolant container. You should see a MAX (FULL) and MIN ( LOW) mark on the side of the container. The level should be between these two marks.
Allow the engine to cool down, then slowly open the coolant container cap by turning it counter-clockwise.
Dilute coolant with water such that the mix is 50% water and 50% coolant( Ensure to verify that the coolant is not premixed, though. If this is the case, then you do not need to mix the coolant with water)
Pour your coolant into the coolant container while watching the markings on the exterior of the plastic container.
Observe the coolant for a minute or two to ensure that there are no leaks.
Reinstall the coolant cap.
Carefully monitor the engine temperature gauge on the instrument cluster.
It is not recommended to keep the engine running if it continues to overheat or if it keeps losing coolant.
Check for coolant leaks.
It is not normal to have to add engine coolant frequently. Have an auto mechanic diagnose and repair your vehicle.