Skip to main content

License Plate Light Bulb Replacement Hyundai Elantra 2011-2016

In this guide, you will find instructions on how to replace the license plate light bulb on Hyundai Elantra, models 2011 through 2016.

 License Plate Light Bulb Replacement Hyundai Elantra 2011-2016
ESTIMATED TIME 20 min
DIY COST $3-$9
DIFFICULTY Very Easy

There are two bulbs that illuminate the rear license plate. If one of them burns out, it is recommended to replace both of them at the same. 

What you will need

Procedure

  1. Park your vehicle and set the parking brakes.
  2. Pop the rear trunk lid and lift it. It is easier to replace the license plate bulb with the rear trunk lid open.diy replace license plate light hyundai elantra
  3.  Remove the license plate light bulb lens. Use a flat screwdriver to pry out the lens. tag license plate light replacement hyundai elantra
  4. Remove the burned bulb and reinstall a new light bulb. 
  5. Reinstall the license plate light bulb assembly in reverse order.

Comments

Visitor

Who knew that it was so easy to change this bulb. Just saved $30. Thanks for sharing.

Add new comment

Plain text