Skip to main content

Map Light Dome Light Replacement Toyota Camry 2012-2017

Step-by-step procedure on how to replace the interior dome light and map light on a 2012-2017 Toyota Camry XV50.

Map Light Dome Light Replacement Toyota Camry 2012-2017
ESTIMATED TIME 20 - 30 mins
DIY COST $ 15 - 30
DIFFICULTY Easy

What you will need

Procedure

  1. Unlock the vehicle and go to the front seat. Locate the map light on the roof near the rearview mirror. The map light of the Toyota Camry.
  2. Pop the lampshade covers out by inserting a small flat screwdriver and using it to push the cover out.Poping out the lampshade cover of the map light.

     

    Poping out the lampshade cover of the map light.
  3. Remove the light bulbs by pulling them out.Pulling out the map light bulb.

     

  4. Get the new light bulbs, line them into the installation port and push them in to set them into place.The new map light of the Toyota Camry.

     

    Installing the new map light.
  5. Check the new light bulb by switching on the map light.Testing the new map light.

     

  6. Line up the lamshade covers back to the map light and push them in to lock them in place.Reinstalling the lampshade covers of the map light.

     

    Reinstalling the lampshade covers of the map light.
  7. Go to the backseat and locate the dome light on the roof.The Dome light of the Toyota Camry 2012.

     

  8. Insert the flat screwdriver into the dome light lampshade cover and use it for popping out the cover. Then remove the cover by pulling it out.Poping out the lampshade cover of the dome light.

     

    Removing the lampshade cover of the dome light.
  9. Squeeze the tab on the side of the light bulb and pull it out to remove it.Removing the dome light of the Toyota Camry.Removing light bulb of the dome light.

     

  10. Get the new light bulb, line it up to the dome light port, and push it in to set the light bulb into place.Installing the new light bulb of the dome light.The new light bulb of the dome light.

     

  11. Check the new light bulb by switching on the dome light.Checking the new light bulb of the dome light.

     

  12. Line up the lampshade cover back to the dome light and push it in to lock it into place.Reinstalling the lampshade cover of the dome light.

     

    Reinstalling the lampshade cover of the dome light.

Comments

Add new comment

Plain text

Notes

  • Do not touch light bulbs with bare hands as that can shorten the life of the light bulb. 
  • Installing LED bulbs:
    • If you are upgrading to LED light bulbs, and the bulb doesn't turn on when you install it simply remove the LED bulb and rotate it 180 degrees and reinstall it. 
    • Certain vehicles may trigger a fault message stating faulty or burned light bulb when the original bulb has been upgraded to LED. If that is the case, use halogen bulb or get an Error Free LED bulb
Map Light Dome Light Replacement Toyota Camry 2012-2017 Step-by-step procedure on how to replace the interior dome light and map light on a 2012-2017 Toyota Camry XV50.