What does Check Brake Pad Wear mean on a Mercedes-Benz?
Check brake pad wear means that the front or rear breaks have worn and need to be replaced. The error message comes up when the brake pad material has worn to the minimum thickness, which means the brake pads need to be replaced.
As the brake pads wear out to minimum thickness, the wear sensor inside the brake pad comes in contact with the rotor, which then turns on the warning message.
How do you check brake pad wear on a Mercedes-Benz?
When you check brake pad wear on a Mercedes-Benz, you don't know which brake pads need to be replaced. Most likely, your front brake pads need to be replaced, but you need to inspect the pads.
There are two methods to check which brakes are worn. One method is to use a Mercedes-Benz scanner and read the fault codes. The scanner will show if it is the front or rear brakes.
The option is to remove the brake pads and inspect them for wear. You will notice that one set of brake pads may be more worn than the other.
In some cases, the brake pads may not wear eventually. The outer pad may have plenty of life left, while the inner pad is completely worn out. Check the inner brake pad, not the outer, since the wear sensor is installed in the inner brake pads as well.
How to reset Mercedes-Benz check brake pad wear?
Mercedes-Benz check brake pad warning message resets automatically once you replace the worn brake pads. There is no procedure to carry out to reset the brake pad wear. If you don't replace the worn brake pads, the message won't reset.
I changed the brake pads on my Mercedes-Benz but check brake pad still comes up.
There are two common reasons why the check brake pad message comes up even after replacing the brake pads.
Other issues can prevent "check brake pad" warning messages from resetting, including damaged module, connector, wires, etc. Still, the most likely scenarios are wear sensor wasn't replaced, or another set of brakes is also worn.
What is a Mercedes-Benz brake wear sensor?
The brake pad wear sensor alerts the driver that the brake pads need to be replaced on Mercedes-Benz. Depending on the Mercedes-Benz model and year, the wear sensors are designed to break or complete a circuit once the brake pad gets worn out, enough for the sensor to contact the brake rotor.
Can I drive a Mercedes-Benz that shows check brake pad wear?
Once the warning message comes up, you typically have about 200-400 miles of life left on those brake pads. If you go past that point, the brake pads will wear completely.
In addition check, brake fluid level warning may come on if brake pads are not replaced on time.
Do all Mercedes-Benz wheels have brake pad wear sensors?
No. Mercedes-Benz cars typically have only two brake pad wear sensors, one per axle. Typically, there is a brake wear sensor at the front left wheel and another brake wear sensor for the rear axle located at the right rear wheel.
Can I reuse my old Mercedes-Benz wear sensors?
No. Once the brake pads wear, they also wear the insulation for the wear sensor. Once the insulation exposes the wire underneath, that sensor can not be reused.
If you replace the brake pads before you even get the brake-worn warning message, in those cases, you will be able to reuse the sensor.