What does that Mercedes-Benz warning light mean? Take a look at the most common Mercedes dashboard lights and what they mean.
This is the engine malfunction warning light. This light comes on when the On Board Diagnostic (OBD) system indicates that there is a problem with the way the engine is running. It could be something as simple as a loose gas cap or even a transmission problem. Use an OBD-II scanner to read the fault codes via the OBD-II port located under the dashboard on the driver's side. Don't ignore the check engine light or your vehicle may go into limp mode.
The airbag light or also known as SRS light, lets the driver know that the airbag system has malfunctioned. When airbag light stays on all the time it means the airbags may not deploy if you get in an accident. The airbag light may come on due to a defective seat mat sensor on the passenger seat, a defective clock spring, stuck seat belt buckle etc.
Tire Pressure Monitoring System. Check the tire pressure and add air if one or more tires have low tire pressure. Find a space place to park and check that you don't have a flat tire. Check tire pressure and add air to any tires that may be low. The recommended tire pressure is found on a black sticker on the driver's door frame or behind the fuel gas cap door. If the light remains on, the system has malfunctioned or one of the sensors in your rim has failed.
The battery symbol will come on if your battery is not getting charged or the alternator is not working properly. This light will come on if the battery is not getting charged, the serpentine belt is broken, the alternator is defective, the voltage regulator is malfunctioning.
This light is reminding you that you or your passengers need to use the seat belt.
This warning light means that you are low on Diesel Exhaust Fluid or also known as DEF. Add DEF fluid as soon as possible. The AdBlue indicator is found on 2010 and newer Mercedes-Benz models with BlueTec technology. The main purpose of the AdBlue fluid is to remove the harmful particles from the exhaust.
The distance warning lamp will light up if you are getting to close to the vehicle in front of you. Distance warning may come to stay on if there is a problem with the autonomous braking function COLLISION PREVENTION ASSIST PLUS.
This is the warning light for the electronic stability control. Try restarting the car, turning the steering wheel all the way to the left and then all the way to the right. In some cases, this procedure will reset the ESP warning. This warning may come on if you recently replaced the battery. It can also come on if you have a bad wheel speed sensor. If the light says ESP Off or ESP Off it could be because you have pressed the ESP button on the dashboard.
The light bulb symbol means that one or more of the light bulbs is burned out. You should see a warning message on the center of the instrument cluster. If all your lights work but you are still getting this warning it could be due to one of the bulbs having been replaced with a bulb that has the wrong wattage.
It means that you are running out of fuel. Stop at the closest gas station and add fuel.
In most cases, it comes on because you either forgot to release the parking brake or the parking brake is not fully released. The light could also mean brake system failure. Your brakes may stop working. Stop carefully and check that the brakes are working properly. The brake light may come on because of a leak from the brake line, low brake fluid level or even due to a defective brake light switch. Get your Mercedes-Benz diagnosed as soon as possible and keep in mind that your brakes may stop working as you are driving.
This warning light means the Anti Lock Brake System is not working. This doesn't mean your brakes are not functioning. It means the vehicle may skid or take longer to bring to a complete stop. If the ABS system fails, ESP (Electronic Stability Program), BAS (Brake Assist), EBD (Electronic Brake-force Distribution) will most likely be deactivated as well. All these systems depend on the ABS system to function. Common problems that trigger Mercedes-Benz ABS light are brake light switch, ABS wheel speed sensor, and defective clock spring. Use a multi-system OBD-II scanner to read fault codes from the ABS module.
The spiral symbol that looks like a spring, is the glow plug light. On diesel models, when you first turn on the ignition you need to wait a few seconds for the glow plug to turn off. Once the glow plug light turns off, you are good to start the engine. The glow plugs are installed to warm up the cylinders so that you can easily start the engine.
This symbol means that the power assist is malfunction. When that happes the steering wheel may be difficult to turn. The problem could be the power steering pump or the case of electronic power steering it could be a defective power steering motor. On older Mercedes-Benz models steering symbol will also come on if you have released the steering column lever to adjust the steering wheel and haven't locked it again.
The temperature means the engine is overheating. Don't drive your car if it is overheating. Find a safe location and turn off the car to allow the engine to cool down. Once the engine is cooled down, you should check the coolant level. Problems that can cause Mercedes temperature light to come on include a bad water pump, stuck thermostat, low coolant, defective temperature sensor, etc.
These are some of the most common Mercedes lights that you will see on A Class, B Class, C Class, E Class, CLK Class, CLS Class, ML Class, GL Class, R Class, GLA, GLS, GLC, GLE and other models.
Did we forget to explain a Mercedes-Benz dashboard warning light? Describe a Mercedes warning light in the comments below and we will add it to the list.