By YOUCANIC on Apr 25, 2019
Looking for a good OBD-II scanner to diagnose Mitsubishi cars, trucks and SUVs?
It doesn't have to be expensive to read and clear fault codes from your Mitsubishi. A Mitsubishi scanner can help you know the reason why the check engine, ABS, SRS light are on. It can also help you diagnose transmission and airbag problems.
In this article, we discuss several diagnostic scanners that allow DIYers to do in-depth troubleshooting of Mitsubishi Lancer, Outlander, Mirage, Eclipse, Raider, etc.
We tested the Launch Creader and found it very easy to use and quick to retrieve the fault codes from the ECU. It is an affordable OBD diagnostic tool, and it has one main advantage over the Foxwell NT630. Besides being able to scan the ECU, ABS and SRS system, it is also able to examine the automatic transmission control unit.
The Launch Creader supports multiple automobile brands as well. It provides a description of the fault problem right on the LCD. Write down the error code and do some research related to that particular fault code. An inexpensive diagnostic tool that can save you money and headaches if you are trying to reset the service engine or clear the airbag light.
All the Mitsubishi dealers in the US use the Multi-Use Tester (MUT) III. It is the diagnostic tool that can access all the systems in Mitsubishi cars, trucks and SUVs. The MUT3 is manufactured by Bosch who is the OEM vendor. MUT 3 allows a technician to perform key reprogramming, in-depth diagnostic and system configuration.
Mitsubishi MUT 3 requires a laptop and connects to the VCI module via USB cable. The VCI then connects to the OBD-2 port of any Mitsubishi. The MUT 3 cost over $5,000 and requires a subscription, you can read more about the MUT-III here.
The Foxwell NT630 is a professional OBD2 scanner that will be able to scan multiple systems on your Mitsubishi such as the engine, airbag, ABS and more. With the NT630 you will be able to activate solenoids to perform testing of different units such as the ABS and EMB. Manually run the ABS motor. You can test valves and TRACS system. You can also carry a brake bleed test.
We like the NT630 because it is compatible with multiple Asian, Domestic and European vehicles. It is also compatible not only with OBD-II vehicles but also with OBD-1. It will work on many cars, minivans, SUVs and trucks.
The MaxiDiag Elite scanner provides a multisystem scan and diagnostics. There are two visions of the MD802. The 4 system scanner only diagnoses engine, ABS, SRS / Air-Bag and transmission.
There is also an All System scan which besides ABS/SRS/ECU/TCU can scan the EPB, calibrate the steering wheel sensor, reset the oil service reminder and more. The MaxiDiag works on both domestic and import vehicles.
All the OBD2 scanners in this list are good choices if you want to read, erase and diagnose the four primary systems on Mitsubishi cars:
If you are looking for a professional level diagnostic scanner that has similar capabilities to the Mitsubishi Dealer MUT 3 Diagnostic scanner you may want to consider Autotel MaxiDAS Scanner. It is one of the least expensive professional-level scanners that provides in-depth troubleshooting on any system on your Mitsubishi.