Skip to main content

Nissan Intelligent Forward Collision Radar Sensor Replacement

Guide on how to replace the intelligent forward collision sensor on a Nissan Rogue Sport 2017+.

Nissan Intelligent Forward Collision Radar Sensor Replacement
ESTIMATED TIME 40 mins - 1.5 hours
DIY COST $ 50 - 150
DIFFICULTY Intermediate

What you will need

Procedure

  1. Remove the front bumper or the front bumper grille to have access to the intelligent forward collision sensor. If you need help with this step, follow this tutorial for the removal and installation of the front bumper.
  2. Disconnect the electrical connector of the sensor by pressing the clip and pulling the connector out.Disconnecting the electrical connector of the intelligent forward collision sensor

     

  3. Remove the three 10mm bolts holding the sensor by turning them counter-clockwise using a 10mm socket.Removing the three 10mm bolts holding the intelligent forward collision sensor.

     

  4. Remove the sensor by pulling it out from the vehicle.Removing the intelligent forward collision sensor of the Nissan Rogue Sport.

     

    Removing the intelligent forward collision sensor of the Nissan Rogue Sport.
  5. Line up the new intelligent forward collision sensor and install the three 10mm bolts by turning them clockwise using the 10mm socket.Installing the new intelligent forward collision sensor of the Nissan Rogue Sport.

     

    Reinstalling the three 10mm bolts holding the intelligent forward collision sensor.
  6. Reconnect the electrical connector of the sensor by pushing it towards its connection port.Connecting the electrical connector of the intelligent forward collision sensor.

The radar sensor mounted at the front of the radiator (behind the grill) will require programing and calibration for it to work properly. 

Comments

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes