Rear Turn Signal Replacement Nissan Quest 2011-2017
Learn how to change reverse/backup light bulb on Nissan Quest. This guide applies to Quest manufactured in 2011 2012 2013 2014 2015 2016 2017.
What you will need
- Nissan Quest Reverse Backup Bulb Type: W16W Bulb
Remove the key from the ignition of your Nissan Quest. Place your Quest in park and set the parking brakes.
Locate the backup/reverse light bulb on your Nissan Quest.
Press the trunk/liftgate release button and open the back.
Remove the panel to access the back of the tail light assembly. Remove the plastic retaining pins carefully.
Replace Nissan Quest backup light bulb by twisting it counter clockwise. Pull out the bulb and press the new bulb in place.
💡 Help us improve this article by providing feedback. No registration is required.
💭 Ask car questions in our Car Forum.