Skip to main content

How to Replace Inner Door Handle Honda Fit 2007-2013

Step-by-step procedure on how to replace the inner door handle on a 2007-2013 Honda Fit 2nd Gen.

ESTIMATED TIME 30 mins - 1 hour
DIY COST $ 10 - 15
DIFFICULTY Easy

Video

What you will need

Procedure

  1. Remove the door panel. Click on the link below to see the step-by-step procedure on how to remove the door panel.Removing the door panel of the Honda Fit.

    https://www.youcanic.com/wiki/2007-2013-honda-fit-2nd-gen-remove-reinstall-door-panel

  2. Unlock the clips by detaching them from the inner door handle cables by pulling them up. You may use a Pick Tool to remove the door handle easier .Pulling the clips up to unlock.

     

    Unlocking the clip holding the cable.
  3. Pull the cables out from the inner door handle.Removing the cable of the inner door handle.

     

     

    Removing the cable of the inner door handle.
  4. Align up the cables to the new replacement inner door handle and pull to set them into place.Installing the cable of the inner door handle.

     

    Installing the cable of the inner door handle.
  5. Push the clips down to lock the cables of the inner door handle.Pushing the clips to lock the cables on the inner door handle.

     

  6. Reinstall the door panel and place the inner door handle on the door panel. For more help see this guideReinstalling the door panel and inner door handle.