How to replace windshield wiper on Chrysler Crossfire

2004-2008 Chrysler Crossfire Windshield Wiper Blades Replacement

Learn how to change the wiper blades on a Chrysler Crossfire. These instructions apply to models such as Crossfire manufactured during these years 2004 2005 2006 2007 2008.

Replacing the wiper blades on your Chrysler Crossfire is easy and takes less than 15 minutes.

What you will need

You will need new wiper blades for your Chrysler Crossfire. Below you will find Chrysler Crossfire wiper blade size.


Turn off the ignition

Remove the key from your Crossfire's ignition.

How to replace wiper blades

Locate Wiper Blade

Let's start by changing the wiper blades on the driver side of your Chrysler Crossfire.

Lift Wiper Arm

Move the wiper blade up.

DIY Replace Wiper Blade Chrysler  2004 2005 2006 2007 2008

Remove wiper blade

The wiper blade of your Crossfire is locked in place by a small clip. Press on the clip and remove wiper blade from the wiper arm.

Chrysler Wiper Blade Replacement

Install new Wiper Blade

Next, replace the wiper blade on Chrysler Crossfire. You may need to tilt the wiper blade to remove it from the bracket. Install new wiper blade on Chrysler Crossfire. Align the new wiper blade with the wiper arm. Press the wiper blade until you hear it lock in place. Once the wiper blade has locked, slowly lower the wiper arm. Next, replace the wiper blade on the passenger side of your Crossfire.



💡 Help us improve this article by providing feedback. No registration is required. 

Need Help?

💭 Ask car questions in our Car Forum.

Add new comment