Skip to main content

Set Ford Fusion Rear Parking Brakes on Maintenance Mode

Step-by-step procedure on how to release the rear parking brake on a Ford Fusion 2013-2020 to change brake pads.

Set Ford Fusion Rear Parking Brakes on  Maintenance Mode
ESTIMATED TIME 2 - 3 mins
DIY COST $ 0
DIFFICULTY Very Easy

Procedure

  1. Insert the key into the ignition switch.Inserting the key into the ignition switch.

     

  2. Turn the ignition to accessories position.Twisting the key to the accessories position.

     

  3. Press on the brake pedal and set the gear shift to neutral.Shifting the gear to neutral.

     

  4. Press and hold the accelerator pedal and the parking brake button together.
    Parking Brake Button

     

    Pressing the accelerator pedal and the parking brakes.
  5. Turn the ignition switch to the off position.Turning the ignition switch to the off position.

     

  6. Turn the ignition switch again to the accessories position.Turning the ignition switch to the accessories position.

     

  7. Release the parking brake and accelerator pedal. 
  8. The cluster will show Brake Park is on Maintenance mode.

Comments

Add new comment

Plain text

Set Ford Fusion Rear Parking Brakes on Maintenance Mode Step-by-step procedure on how to release the rear parking brake on a Ford Fusion 2013-2020 to change brake pads.