Skip to main content

Subaru Add Windshield Washer Fluid

This guide provides instructions on how to add windshield washer fluid to a Subaru. When the Subaru wiper fluid is low, this warning will appear on the dashboard.

Subaru Add Windshield Washer Fluid
ESTIMATED TIME 5 Min
DIY COST $3-$10
DIFFICULTY Very Easy

 

What you will need

Do not add only water in the windshield washer fluid reservoir. Just water can freeze in cold climates and damage the system. 

Procedure

  1. Park your Subaru on level ground. Engage the parking brakes. Turn off the engine. add windshield washer fluid subaru impreza
  2. Pull the hood release under the dashboard. It is located on the driver's side, below the dash.
  3. Locate the windshield washer fluid reservoir. On a Subaru, it is located on the driver's side of the engine. 
  4. Remove the cap by lifting it up. Add windshield fluid washer until you bring the level just below the cap.

That's it! Adding windshield washer fluid to a Subaru is very easy. 

Windshield washer fluid is also called windshield wiper fluid, wiper fluid, screen wash.

 

Only use approved windscreen washer fluid. 

 

Comments

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes