Toyota ABS Light Reset Instructions

This guide provides step-by-step instructions on how to read codes and reset or clear Toyota ABS light and codes.

Once you read the codes, you will need to fix the underlying problem before resetting the ABS light on your Toyota. In most cases, the problem is a bad ABS wheel speed sensor. You can clear the ABS light following these instructions.

Toyota

ESTIMATED TIME 20 min

DIY COST $65-$160

DIFFICULTY Intermediate

What you will need

Toyota ABS scanner tool

Toyota ABS codes can not be read or reset with a generic OBD-II scanner designed to access the engine module. To read, clear, and reset the Toyota ABS light, you will need a scanner to work on Toyota and access the ABS module.

How to Reset Toyota ABS codes and light

Connect your OBD-II diagnostic tool to the diagnostic port located under the driver dash area.
Turn on your ignition two clicks; do not turn on the engine.
Allow the OBDII tool to communicate with your car.
Select the Toyota model or do an auto scan.
Scroll down to the ABS module. Select “Read Fault Codes”
Write down all the fault codes and fix them.
Come back and select clear fault codes to erase the ABS light.

It is important to realize that you can not clear the Toyota ABS light or reset the codes without fixing it. If you clear Toyota ABS lights without fixing the problem, the ABS light will come back as soon as you start to drive.