Skip to main content

Turn BMW Ignition ON without without Starting Engine

If your BMW is equipped with a Start/Stop button, you may wonder how you turn on the dashboard lights, radio, and cigarette outlet without starting the car.

Turn BMW Ignition ON without without Starting Engine
ESTIMATED TIME 1 min
DIY COST $0
DIFFICULTY Very Easy

 

bmw start engine

You would turn the key one click on older BMWs, which was the position I or also known as the accessory position. In this guide, you will learn how to turn BMW accessories on (not start the engine) if your car has START/STOP.

The procedure to turn the BMW ignition on is straightforward.

BMW has Automatic Transmission

  1. Get into the car.
  2. Do not press the brake pedal.
  3. Press the Start/Stop button. Twice if necessary.
  4. Ignition will turn on; the engine will not start.

BMW has Manual Transmission

  1. Get into the car
  2. Do not press the clutch pedal.
  3. Press the Start/Stop button
  4. BMW ignition will turn on will not start.

Make sure to not keep the ignition on for a long time as it could drain the battery. This will cause your BMW battery to die, and you won™t be able to start the car without jump-starting it.

If you plan on keeping the ignition on for more than 10 minutes, such as for diagnostics, etc., connect a battery trickle charger to the jump terminals under the hood.

Avoid radio, heating, and other accessories when the ignition is on, and the car is not running.

Comments

Visitor

OK it works on my 2020 x3.....BUT once finished listening how do I turn it off? Pushing the button again once, twice, three times...DOES NOT WORK. Only thing I can do is open the door, step out and then lock the car from the outside.....but all I want to do is just sit in the car.

Jim Sr.

I have the same question as the previous poster. How can I turn ignition off after turning on without starting engine/ Many thanks!

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes