Skip to main content

Volkswagen Jetta Replace License Plate Light Bulb

The following guide explains how to replace the license plate light bulb on a Volkswagen Jetta. 

 Volkswagen Jetta Replace License Plate Light Bulb
ESTIMATED TIME
DIY COST
DIFFICULTY Very Easy

What you will need

How to change VW License Plate Light

  1. Park VW and set the parking brakes. 
  2. Press the trunk release and open it. 
  3. Use a flathead screwdriver to press the license plate light to the right side. VW tail light
  4. Next, pull down the license plate light to get it out. VW remove license plate light bulb
  5. Press the clip for the electrical connector and disconnect the connector. 
  6. Replace the light bulb and reinstall the light bulb back on the trunk. 

The vehicle that you see here is a 2016 Volkswagen Jetta, but the instructions are the same for VW Golf, GTI, Bora, Passat, EOS, CC. 

Note that the same procedure can be used to upgrade VW license plate lights. 

Comments

Add new comment

Plain text