2015–2018 Jeep Renegade Front Bumper & Headlight Assembly Removal

About this video

Need to pull the front bumper or remove a headlight assembly on your Jeep Renegade? In this video we walk you through the complete front bumper removal and headlight assembly removal — step by step — so you can access the headlights, grille, and front-end components to make your repair.

🔧 WHAT WE COVER
– Locating and removing the bumper fasteners, push clips, and screws
– Detaching the fender liner edges and freeing the bumper cover
– Safely disconnecting fog light / marker wiring (where equipped)
– Removing the headlight assembly bolts and unplugging the connector
– Reinstallation tips so everything lines up clean with no rattles

🚙 WHICH JEEP RENEGADE THIS APPLIES TO
This was filmed on a pre-facelift Jeep Renegade (BU), which covers the 2015 through 2018 model years.
IMPORTANT: Jeep gave the Renegade a facelift for the 2019 model year that REDESIGNED the front bumper and headlamps. The general concept is the same, but the 2019–2023 facelift bumper and headlight assemblies use different fasteners and mounting, so the exact steps will differ for those years. Make sure you know whether you have a pre-facelift (2015–2018) or facelift (2019–2023) Renegade.

🔁 RELATED / SISTER MODEL (WIDER HELP)
The Jeep Renegade shares its FCA Small Wide 4×4 platform with the Fiat 500X, which is built alongside it. The general strategy — finding the hidden clips, freeing the fender edges, and unbolting the headlight — is a helpful reference for Fiat 500X owners too. Note that the 500X has its own front-end styling, bumper cover, and headlight assemblies, so the fastener locations and exact procedure are different.

🔎 SEARCH TERMS THIS HELPS WITH
Jeep Renegade front bumper removal, how to remove front bumper Jeep Renegade, Jeep Renegade headlight assembly removal, Renegade headlight replacement assembly, how to remove headlight Jeep Renegade, Jeep Renegade bumper clips, 2015 2016 2017 2018 Jeep Renegade front bumper, Renegade grille removal, Jeep Renegade front end disassembly, Fiat 500X bumper removal

💡 QUICK TIP
Take your time finding every hidden push clip before you pull — most cracked bumper tabs happen from prying while one fastener is still holding. Bag and label your screws by location so reassembly is quick, and gently release wiring connectors rather than yanking the harness.

For more DIY guides, repair resources, diagnostic tools, and step-by-step help, visit 👉 youcanic.com

👍 If this helped, like and subscribe for more DIY repair and diagnostic videos!