Jeep Renegade 2.4L Alternator Removal & Install — Complete Guide (2015–2023 Models)

About this video

In this video I walk through a complete alternator replacement on a 2018 Jeep Renegade with the 2.4L Tigershark (MultiAir2) engine. Whether your alternator is failing, your battery light is on, or you’re getting a low-voltage / charging system warning, I’ll show you exactly how to diagnose, remove, and install a new alternator — step by step — so you can do this job in your own driveway and save on labor.

This procedure applies to the entire first-generation Jeep Renegade (BU), model years 2015–2023, including the 2019 facelift/refresh models.

🚗 DOES THIS VIDEO APPLY TO MY VEHICLE?
The 2.4L Tigershark (MultiAir2 / engine code ED6) in this Renegade is shared across a wide range of FCA / Stellantis vehicles, so this alternator job will be very similar — and in many cases nearly identical — on these models as well:

– Jeep Cherokee (KL) 2.4L — 2014–2023
– Jeep Compass (MP) 2.4L — 2017–2023
– Dodge Dart 2.4L — 2013–2016
– Chrysler 200 2.4L — 2015–2016
– Ram ProMaster City 2.4L — 2015–2022
– Fiat 500X 2.4L — 2016–2023
– Fiat Toro 2.4L — 2017+

Note: Exact alternator location, accessibility, and the amount of stuff you have to remove can vary slightly between these models, but the engine, alternator, and overall procedure are the same.

🔗 SISTER VEHICLE
The Jeep Renegade shares its FCA “Small Wide 4×4” platform with the Fiat 500X — they’re built alongside each other at the Melfi plant in Italy. If you own a Fiat 500X, this video applies to you too, especially with the 2.4L engine.

👍 If this helped, like and subscribe for more DIY auto repair tutorials.
⚠️ Work safely. Always disconnect the battery before working on the charging system, and use jack stands — never work under a vehicle supported only by a jack.

#JeepRenegade #AlternatorReplacement #2.4Tigershark #DIYAutoRepair #JeepRepair #Fiat500X #JeepCompass #JeepCherokee