Jeep Renegade Interior Dome Light Replacement (2015-2023) – Full DIY Guide
About this video
In this quick DIY tutorial, you’ll learn how to replace the interior dome light on your Jeep Renegade. Whether your dome light stopped working, the bulb burned out, or you want to upgrade to a brighter LED, this walkthrough shows you how to safely remove the lens, swap the bulb, and get your interior lighting back. It’s one of the easiest fixes on the car and takes just a few minutes with no special tools.
🔧 What This Video Covers:
✅ Common reasons the dome light stops working (burned-out bulb, dead contact)
✅ Safely prying off the dome light lens without cracking it
✅ Identifying the correct bulb type for your Renegade
✅ Removing the old bulb and installing the new one (or an LED upgrade)
✅ Snapping the lens back in and testing all light functions
📅 Applicable Years / Generations:
This procedure applies to the Jeep Renegade BU generation (2015–2023).
– Pre-facelift: 2015–2018
– Facelift: 2019–2023
The interior dome light design carries over across the full BU run. Renegades with a fixed roof vs. the My Sky removable roof panels may have slightly different overhead console layouts, but the bulb replacement process is the same. Always match the replacement bulb to the type in your specific vehicle.
🚗 Also Applies To These Related Vehicles:
The Jeep Renegade shares its platform (FCA Small Wide 4×4) and much of its interior/overhead console hardware with its corporate sister vehicle:
– Fiat 500X (2016–2023)
Because dome light design is tied to the interior and platform rather than the engine, Fiat 500X owners will find this procedure very similar in how the lens releases and the bulb swaps. Bulb types can vary by trim and lighting package, so always confirm the correct bulb for your vehicle before buying.
🔍 Related Search Terms:
jeep renegade dome light replacement, jeep renegade interior light not working, jeep renegade dome light bulb, renegade interior light out, jeep renegade led interior upgrade, jeep renegade overhead light, how to remove dome light jeep renegade, fiat 500x dome light, jeep renegade map light replacement
💡 Quick Tip: Use a plastic trim tool and gently pry at the notch on the edge of the lens rather than digging in with a metal screwdriver — that’s what cracks the plastic. If you’re upgrading to LED and the new bulb doesn’t light up, just flip it around: LEDs are polarity-sensitive and only work one way.
👉 For more DIY guides, troubleshooting help, tools, and resources, visit youcanic.com