Jeep Renegade MAF Sensor Replacement DIY (2015 to 2023 Mass Air Flow Fix)

About this video

Replace the mass air flow (MAF) sensor on your Jeep Renegade in minutes. This quick guide shows you where the MAF sensor is located, how to unplug and remove it, and how to install the new one without damaging the connector.
A dirty or bad MAF sensor causes rough idle, hesitation, stalling, poor fuel economy, and codes like P0100, P0101, or P0102. Swapping it is one of the easiest fixes you can do at home.
Tools you may need: a screwdriver or Torx bit and MAF sensor cleaner if you want to clean before replacing. An OBD2 scanner like the UCAN-II-D confirms the fault and clears the code afterward.
Fits 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 Jeep Renegade. Subscribe to YOUCANIC for more DIY repairs and get the full guide at youcanic.com.