You could get a flat tire anywhere. All it takes is a random nail on the side of the road or a piece of glass in a parking lot, and suddenly, one of your tires doesn’t have any air in it! Tires also wear out over time. The 2015 Volvo XC60 Owner’s manual recommends you replace your tires every six years. This guide will show you how to safely change your tire using the tools in your trunk. Before you begin, check your tire pressure specifications.

Required Tools

  • Jack
  • Lug wrench
  • Wheel wedges
  • Tire Inflator
  • Tire pressure gauge
  • Safety gear
  • Spare tire

Step-by-Step Instructions

  1. Park on level ground away from traffic. Pull the emergency brake lever and turn the steering wheel straight. Check your dash warning lights to confirm that your emergency brake is engaged.
  2. Your trunk should have a spare tire, jack, and lug wrench under the floor. Find and pull the tire and tools out..
  3. Before lifting the vehicle with the jack, use the lug wrench to loosen (but not remove) the lug nuts.
    👍Pro Tip: If you are having trouble loosening the lug nuts, step down on the lug wrench.
  4. Locate the proper jacking points under your vehicle. For front tire replacement, use the front jack point. For rear tire replacement, use the rear jack point. Place wheel wedges, bricks, or large rocks in front of and behind the wheels still on the ground.
    • This is one of the front jack points.
    • This is one of the rear jack points.
      Refer to your owner’s manual for the exact location of the jack points.
      👍Pro Tip: Give your vehicle a wiggle test to make sure it is securely on the jack.
  5. Once the vehicle is raised and stable, completely remove the lug nuts and the flat tire, storing the lug nuts in a safe place for later. Place the flat tire under the vehicle’s frame as a safety backup in case of jack failure.
  6. Mount your spare tire onto the wheel hub. Reference your VIN sticker and tire pressure label on the driver’s side for proper tire specifications and pressure.
  7. Lower the vehicle until the spare tire touches the ground but doesn’t bear full weight. Tighten lug nuts in a star pattern, then completely lower the vehicle and perform final tightening to the specified torque.
  8. Take your vehicle to a repair shop or auto parts store to fix your flat tire or buy a new one.
  9. If your flat tire cannot be fixed, take it to a tire recycling plant or auto parts store for proper disposal.

Post-Installation Check

  • Verify instrument cluster warnings.
  • Check the tire pressure monitor system.
  • Store the flat tire and tools properly.
  • Document the spare tire installation.

Warning Signs

  • Dashboard warning lights (TPMS, ABS or TCS).
  • Steering wheel vibration.
  • Instrument cluster alerts.
  • Visible tire damage.
  • The car feels like it is leaning more to one side.

Important Safety Notes

  • Consult the emission label for vehicle weight.
  • Check spare tire pressure monthly.
  • Follow proper torque specifications.
  • Service flat tire as soon as possible.
  • Observe the maximum spare tire speed rating.

Experts Who Contributed to This Article

Elbert Nonog

Elbert Nonog, Automotive National Cert., BS Mechanical Eng.

Diagnostic Specialist13+ years of experience

Elbert G. Nonog is an Automotive Technical Writer and Training Manager with over 10 years of experience across major brands including Chevy, MG, Ford, Volkswagen, and Toyota. Rising from technician to leadership roles, Elbert excels at transforming complex automotive concepts into accessible training materials and documentation. His expertise spans conventional and electric vehicle systems, nationwide dealership training, and aftersales operations management. With TESDA certification and pursuing further education from the Technological University of Philippines, Elbert effectively bridges the gap between automotive engineering and practical application for industry professionals and enthusiasts.