
ESTIMATED TIME 25 - 35 mins
DIY COST $ 25 - 60
DIFFICULTY Easy
What you will need
Procedure
- Remove the window regulator. Click on this link to see the step-by-step procedures on removing the window regulator.
- Line up the window regulator to the inner door panel.
- Install the three bolts holding the window regulator.
- Line up the inner door panel back to the door and install the eight 10mm bolts.
- Install the bolt above holding the window regulator arm.
- Put the window regulator motor back to the inner panel and install the 10mm three bolts.
- Connect the electrical connector of the window regulator motor and door actuator.
Comments
Add new comment