Can the UCAN scanner code or program modules?

The UCAN scanner supports a range of coding and programming functions, though it is not designed as a full ECU programming or module coding tool.

Supported Functions

• Battery registration: Register a new battery after replacement so the vehicle’s charging system adjusts properly
• Injector coding: Program new injector codes after replacement to ensure correct fuel delivery
• TPMS sensor programming: Program new tire pressure monitoring sensors to the vehicle
• Throttle body relearn: Reset and recalibrate the throttle position after cleaning or replacement
• Steering angle reset: Calibrate the steering angle sensor after alignment or suspension work
  Module setting change where allowed and as supported by the module. For example, some cars allow you to change the number of times the turn signal flashes or if the horn has been used or not when you lock the car. These functions vary from vehicle to vehicle.

What It Does Not Do

• Full ECU flashing or reprogramming (J2534 pass-through programming)
• Control module coding like VCDS or factory dealer tools
• Key programming, while supported for some cars, is not supported for all cars, especially those with keys that require online coding or password calculation. Please email us your vin and we can confirm.

To check if a specific coding function is supported for your vehicle, email your VIN to support@youcanic.com or call us at 1-888-959-4265.

Related Videos

BMW Battery Registration

Code Mercedes-Benz Injectors

BMW TPMS Troubleshooting & Programming

BMW Idle Speed & Throttle Position Sensor Reset Adaptation

Volvo Steering Angle Sensor Reset