How to Reset the Steering Angle Sensor on a Volkswagen: Step-by-Step Guide
About this video
- Buy YOUCANIC Pro Scanner
- https://www.youcanic.com/scanner/
- Get Factory Service Repair Manuals & Specs
- https://www.youcanic.com/manuals
Ask Car Questions & Get Help
https://www.youcanic.com/forum/ If you've recently had maintenance done on your Volkswagen's steering or suspension system, you may need to reset the steering angle sensor. In this video, we'll show you how to do just that with a step-by-step guide. We'll walk you through the process of locating the sensor, connecting your diagnostic tool, and following the necessary steps to reset the sensor. Additionally, we'll offer some tips on what to do if resetting the sensor doesn't solve the issue. By the end of this video, you'll be able to confidently reset the steering angle sensor on your Volkswagen and ensure your car's systems are properly calibrated.
If you need help, follow this procedure: https://www.youcanic.com/vehicle/reset-vw-steering-angle-sensor
For more tutorials on this vehicle visit: https://www.youcanic.com/vehicle/volkswagen
👉 *YOUCANIC Full System Diagnostic Scanner*
https://www.youcanic.com/ucan2
A Full System Diagnostic Scanner that works on all vehicles. Can read and clear codes from any system, module, control unit including engine, transmission, airbag, ABS, traction control, climate control, blind spot monitoring, air suspension, door modules, immobilizer just to name a few. Bidirectional support.
- 🆘 *Get help* with your car questions:
- https://www.youcanic.com/support/
- 📧 *Contact Us*
- https://www.youcanic.com/contact/
Full transcript
in this video we're going to show you how to reset the sting angle sensor on a Volkswagen so if you disconnect the battery if you have to work on an electrical system and you have to disconnect the negative or if you replace the battery or if you replace the steering angle sensor itself look at it here behind the steering wheel you will need to clear out string angle sensor reset or calibration so there's an easy way to reset the sting angle sensor on a roaster again and this works in most of the cases if it doesn't then you need a scanner that k out on the sting angle sensor calibration and reset but we're gonna show you how to do it without a scanner like I said this will work in most of the cases the sting angle sensor detects the position of the wheels so if you were turning this and detects how much you the degree that you were turning the steering wheel and that's it does the traction
system that the steering wheel is turned and then the traction system uses the data to calculate the braking and everything to keep the car stable so you'll see we'll have the traction control light on because we this guy - the battery will show how to reset it you see the traction control light is on right there so you'll start the car and you'll turn the steering wheel all the way to the left and all the way to the right and we'll do it place couple seconds hold and back on center now we are we start the car and you can see that the traction control light has turned off so this will work on most of the cases there's some some places they might not any money to carry out collaboration with the scanner that can perform roles Roggin steering angle reset and calibration thank you for watching
More Volkswagen videos
See all
1:53
0:51
4:24
3:55
1:57
0:40



