VW P0555 Brake Booster Pressure Sensor Circuit: How to Fix It!
About this video
- Buy YOUCANIC Pro Scanner
- https://www.youcanic.com/scanner/
- Get Factory Service Repair Manuals & Specs
- https://www.youcanic.com/manuals
Ask Car Questions & Get Help
https://www.youcanic.com/forum/ Are you getting the P0555 error code on your VW? Don't worry; you're not alone! In this video, we'll walk you through how to diagnose and fix the brake booster pressure sensor circuit issue in your Volkswagen. We'll explain the P0555 error code and how to troubleshoot and repair the problem. We'll also cover common causes of the issue, such as faulty wiring or a malfunctioning sensor, and provide tips to prevent the issue from recurring. If you want to save money on costly repairs, don't miss this informative video on fixing the P0555 error code in your VW!
If you need help, follow this procedure: https://www.youcanic.com/vehicle/vw-p0555-code-brake-booster-pressure-sensor-circuit
For more tutorials on this vehicle visit: https://www.youcanic.com/vehicle/volkswagen
👉*YOUCANIC Full System Diagnostic Scanner*
https://www.youcanic.com/ucan2
A Full System Diagnostic Scanner that works on all vehicles. Can read and clear codes from any system, module, control unit including engine, transmission, airbag, ABS, traction control, climate control, blind spot monitoring, air suspension, door modules, and immobilizer just to name a few. Bidirectional support.
- 🆘 *Get help* with your car questions:
- https://www.youcanic.com/support/
- 📧 *Contact Us*
- https://www.youcanic.com/contact/
Full transcript
here we have a Volkswagen or check engine light is on and we're gonna find out why that is on and what sensor is causing I want you to do to fix it so you'd want to use the scanner that can check engine codes ideal you want to use a scanner that can really manufacture codes these kind of like you can we're going to affect your codes from all makes and models including Volkswagen so what you'll do is you'll turn the scanner you go to system selection in codes that trigger the check engine light are stored in the engine control module so press ok this shows the van and the part number for the ECU but you wanna go to read dtc so read the agnostic trouble code and then you can see code p zero five five five in this case it's a brake booster pressure sensor circuit okay so we're gonna take a look at where that sensor is when it says circuit it could be the sensor itself that's faulty but it could
also be the connector it could be the wire that goes to it it in some cases it could be the ECU itself as far as it will help we only have one code so most likely is the sensor or the connector to it so one thing to pay attention is the under state you show as active yeah you might have more codes that say passive or stored those coats were an issue in the past the car is not seeing those problems anymore so those cones are not the ones the reason why your check engine light is on it's the codes that show it's active that needs to be addressed before you can clear that check engine light so let's take a look at where these sensor is so here are in the engine bay you see the engine right here this is the brake from reservoir brake reservoir and the sensor that is reading that check engine light is this sensor right here alright so you can see here this connector is loose and that's what's
causing it you know the sensor itself could go bad and if it does go bad you'll have to replace just the sensor a lot of times will come with the line so you have to replace the lines as well but if you have a code for a circuit issue first connect disconnect the sensor and check for corrosion here I also inspect these wires that they're not damaged you want to reconnect it now press it on till you hear that click once it's click it means it's pushing it all the way so now we're gonna go back in and see if that changed that code from active to passive now before you read the codes you want to start the car two or three times for a couple of minutes so that the ECU updates keeps checking that sensor and updates the code from active it should change to passive so let's take a look so we're going back to ECU a red coat and then brake booster pressures ago you can see passive will change from
active to passive just because of that connection issue and then know what's gonna do now is at this point because it's code is passive you could technically let the engine reset the check engine light on its own that usually takes two or three days for most people a few driving cycles um will allow that check engine light to turn off but since we have the scanner we can come back here and go to proof old codes yes yes do you own a clear the codes yes and you can see the check engine light turned off over there so um the chickens light will not turn off if you have a code that's active it might turn off for a moment but as soon as you restart the car depending on the code it will come back right away some codes you could take a few driving cycles for the hanjung to realize yeah there's still an issue um so clear the codes with active code clearing the check engine Maya with active codes in
the ECU it does not do any good in case you in fact you were just erasing codes that could be helpful for Diagnostics but that's it um as far as this code goes thank you for watching
More Volkswagen videos
See all
1:53
0:51
4:24
2:03
3:55
1:57



