Nissan Quest Reverse Back Up Bulb Replacement

Nissan Quest Replace Backup Reverse Light Bulb

This guide provides instructions on how to change the reverse/backup light bulb on Nissan Quest. This guideline applies to Quest manufactured in 2011, 2012, 2013, 2014, 2015, 2016, and 2017.

What you will need

Bestseller No. 1
Hella 921TB Bulb 921 12V 16W W2.1X9.5D T5 (2)
Hella 921TB Bulb 921 12V 16W W2.1X9.5D T5 (2)
HELLA 921TB Standard Series Incandescent Miniature Light Bulb, Twin Pack; Hella 921TB Bulb 921 12V 16W W2.1X9.5D T5 (2)
$13.56
  • Reverse Backup Bulb
    • Type: W16W Bulb
  • Screwdriver

Procedure

  1. Remove the key from the ignition of the Nissan Quest. Place the Quest in the park position and set the parking brakes. park
  2. Locate the backup/reverse light bulb. Nissan Quest back up light replace guide diy
  3. Press the trunk/liftgate release button and open the back. how to change back up reverse light on Nissan Quest 2011 2012 2013 2014 2015 2016 2017
  4. Remove the panel to access the back of the tail light assembly. Remove the plastic retaining pins carefully. nissan quest backup light bulb
  5. Replace a backup light bulb by twisting it counterclockwise. Pull out the bulb and press the new bulb in place.

Replacing the backup / reverse light bulb on a Nissan Quest is easy and takes about 20 minutes.

We hope you find the Nissan Quest Replace Backup Reverse Light Bulb guide helpful. Check these troubleshooting and repair guides for more help on your Nissan.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *