How can I adjust the software update settings on my Tesla Model 3? Learn how to adjust the software update settings on your Tesla by following the procedures below.


How do you install a Tesla software update?

Once a software update is available, tap the yellow clock icon at the top of the icon. You can select from three ways to install a software update.

  1. Click the icon on the bottom left of the screen.
  2. Scroll all the way down until you see “Software Update Preference.”
  3. Select “Standard” or “Advanced”.

Schedule Update

Tap on the yellow icon to display the scheduling window. Select a time to schedule the software update. After you set a scheduled time to install the update, the yellow clock icon will change to a white icon until the update starts. At any time before the update, you can tap the clock icon to change the time of the update.

Tesla Updates won’t Install 

It could be a software issue if the updates fail or take over an hour to complete. A possible fix is to perform a Touchscreen reboot. Hold your foot down on the brake while holding the two scroll wheel buttons (around twenty seconds) on the steering wheel until the Tesla ‘T’ appears on the touchscreen.

If the touchscreen reboot does not work, perform a vehicle reboot.

  1. Go to ‘Controls’ > ‘E-Brake and Power Off’ > or for Model 3 go to  ‘Settings’ > ‘Safety and Security’ >
  2. ‘Power off and confirm.’
  3. Tap the brake pedal.

System restart should only be performed in extreme cases after you confirm the system is not responding. Restarting the system while updates are in progress can lead to corrupted software.

Do you need Wi-Fi to update Tesla software?

No. Tesla software updates can be received over-the-air software updates.

How do I check if my Telsa needs an update?

You can check if your Tesla needs a software update by going to the ‘Software’ tab on your Touchscreen.

Tap ‘Controls’ > ‘Software.’ If you see “Checking for updates..” your Tesla is checking for new updates.

You’ll notice a notification on your center touchscreen display if a new update is available. Even though you can install the update immediately, we recommend scheduling a later update when WiFi is available. If your Tesla does not need an update, you will note a message saying, “Your car software is up to date.”

What are over-the-air software updates?

Over-the-air software updates install the latest software to operate your vehicle. These can be safety updates, features, and options.

Where can I find information on the latest Tesla software updates?

Press the Tesla T symbol on the touchscreen, then scrolls down to Release Notes.

How can I check the current Tesla software version?

  1. Press the T logo at the top of the touchscreen.
  2. Look for the installed software version number at the bottom left section of the screen.

When do software updates become available?

Software updates occur frequently but have no set schedule. Tesla updates become available as soon as Tesla publishes them.

Can I drive a Tesla during a software update?

No. For safety reasons, you can not drive a Tesla while installing updates. You may want to schedule the updates to happen at a later time.

Can I install updates on a Tesla while charging/

No. You can not charge a Tesla and install updates at the same time. If you install a software update, the car is charging, the charging process will stop, and the car will start a software update. Charing restarts once the software update is completed.

We hope you find the Tesla Model 3 Install Software Update guide helpful. Check these troubleshooting and repair guides for more help on your Tesla.

Leave a Reply

Your email address will not be published. Required fields are marked *