Acura Add Windshield Washer Fluid
No windshield washer fluid coming out from your Acura when pressing its toggle switch? Learn how to add windshield washer fluid to Acura vehicles.
What you will need
- Windshield Washer Fluid
Procedure
Open the hood of the car to access the washer fluid reservoir.
Watch the following video if you need help with this step.
Find the Windshield Washer Fluid Reservoir. The windshield washer fluid reservoir on ACURA vehicles can be found in the passenger compartment of the engine bay. In Acuras with rear wipers, the reservoir also feeds the rear wiper.
Here you can see the location of the windshield washer reservoir on Acura TL vehicles indicated with the blue cap or a black cap with a wiper symbol on top.
Open the reservoir cap by lifting it. Add washer fluid until the level gets about two inches below the reservoir cap.
If your Acura is low on windshield washer fluid level, you will get a warning message on the instrument cluster stating “Low Windshield Washer Fluid Level.”
This guide will teach you how to add windshield washer fluid to Acura vehicles. Adding Acura windshield washer fluid is easy and takes only a few minutes.
This guide applies to Acura models such as the:
- EL
- CSX
- ILX
- TSX
- TL
- TLX
- CL
- RL
- RLX
- NSX
- RDX
- MDX
- ZDX
- SLX
Symptoms
The most common sign that you are low on windshield washer fluid is that no liquid sprays on the windshield when you press the switch/lever. This is because there is No Windshield Washer Fluid in the reservoir. A Low Washer Fluid Warning will appear on the Multi-information display.
We hope you find the Acura Add Windshield Washer Fluid guide helpful. Check these troubleshooting and repair guides for more help on your Acura vehicle.