Can’t clean your Lexus windshield because of an empty windshield washer reservoir? Learn how to fix the problem by adding windshield washer fluid to your Lexus.

add windshield washer fluid lexus

What you will need

  • Windshield washer fluid

Procedure

  1. Park your Lexus in a safe location. Turn off the engine and set the parking brakes.

  2. Open the hood of your car by pulling the release lever located under the dashboard, driver’s side.Opening Hood latch

  3. Go to the front of the vehicle and depress the safety lever under the hood to open the hood.lexus hood latchOpening the hood lock to open the hood
    lexus hood latch

  4. Locate the windshield washer fluid container. The wiper symbol shown on your dashboard is also printed on the cap of the windshield washer reservoir. On most Lexus vehicles, the windshield washer fluid is on the driver’s side of the engine. Lexus windshield washer fluid reservoir location
    2016-Lexus-GX-460Windshield Washer tank symbol

  5. Open the windshield washer fluid container and add your windshield washer fluid until the level is two inches below the top of the cap. Opening Windshield Washer Cap

Close the cap of the windshield washer fluid container, and test out your windshield wipers. The fluid may take a few seconds to spray the windshield.

We hope you find the Lexus Add Windshield Washer Fluid guide helpful. Check these troubleshooting and repair guides for more help on your Lexus.

Leave a Reply

Your email address will not be published. Required fields are marked *