This article provides a tutorial on changing the brake light on a Nissan Quest. This guide applies to model years 2011, 2012, 2013, 2014, 2015, 2016, and 2017.

What you will need

SaleBestseller No. 1
Philips Automotive Lighting 7443 LongerLife Miniature Bulb, 2 Pack, 7443LLB2
Philips Automotive Lighting 7443 LongerLife Miniature Bulb, 2 Pack, 7443LLB2
twice the life of standard incandescent bulbs; best value; original equipment quality seal for the most reliable performance
  • Nissan Quest Brake Light Bulb Type,
    • 7443 Minature Bulb
      • (Also known as W21/5W)
      • Color: Clear
  • Mechanic Tool Set Metric
    • 10mm socket
    • Ratchet wrench
  • Screwdriver


  • Park the Nissan Quest and set the parking brakes. Press the trunk release button to open the back. how
  •  Locate the brake light bulb that needs to be replaced on the Nissan Quest.   Instructions are the same for both driver and passenger sides. Nissan Quest brake light bulb type and how to replace it
  • Locate two 10 mm bolts that you need to remove. Once the bolts are removed, remove the tail light by pulling it back.

  • First, remove the socket by turning it counterclockwise. Next, remove the bulb from the socket and install the new bulb.

  • Install the bulb in reverse order. Reinstall the tail light assembly. how to replace the brake light on nissan quest
  • Replacing the brake light bulb on a Nissan Quest is easy and takes less than 20 minutes.

    We hope you find the 2011-2017 Nissan Quest Brake Light Bulb Replacement guide helpful. Check these troubleshooting and repair guides for more help on your Nissan.

    Leave a Reply

    Your email address will not be published. Required fields are marked *