Volvo Key Fob Battery Replacement Tutorial

Can’t lock/unlock your Volvo due to a dead key fob battery? Learn how to fix the problem by replacing the battery of your Volvo key fob.

This page provides instructions on changing the key fob battery on any Volvo remote. Scroll down until you find the keyless remote that matches yours. Watch the corresponding video or follow the step-by-step instructions.

To replace the battery in this Volvo key remote, you will need a CR2032 battery. Follow the instructions below.

SaleBestseller No. 1

Amazon Basics CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury Free – Pack of 4

Plastic, Metal; Imported; DESIGNED TO LAST: 8-year leak-free shelf life; EASY IDENTIFICATION: Engraved with battery model for quick identification

$5.53

Show Instructions

1. Press and slide the black release at the bottom of the key.
2. As you hold the release pressed, slide the back cover of the remove forward
3. Unlock the front cover by pressing on the exposed small metal tab.
4. Use a flathead screwdriver to rotate the cap to the open position.
5. Note the + on the old battery. Remove the old battery from the key.
6. Install the new battery.
7. Place the two covers back on the remove and lock them by sliding them on the remote.

To change the battery on this Volvo remote, you will need a CR 2450 battery. Follow the instructions below.

SaleBestseller No. 1

Duracell 2450 3V Lithium Battery, 1 Count Pack, Lithium Coin Battery for Medical and Fitness…

$4.09

Show Instructions

1. Remove the metal key from the keyfob. There is a small release switch you need to press.
2. Use the metal key to separate the shell of the key.
3. Remove the battery from your Volvo remote.
4. Install the new battery with + facing up.
5. Replace the back cover and metal key.

To change the battery in this Volvo key fob, you will need a CR2032 battery. Follow the instructions below.

SaleBestseller No. 1

Amazon Basics CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury Free – Pack of 4

Plastic, Metal; Imported; DESIGNED TO LAST: 8-year leak-free shelf life; EASY IDENTIFICATION: Engraved with battery model for quick identification

$5.53

Show Instructions

1. Use a small flathead screwdriver to pry out the back cover.
2. Remove the battery from the remote.
3. Slide the new battery into the key shell.
4. Reinstall the back cover and test the remote.

To change the battery, you will need a CR2032 battery.

SaleBestseller No. 1

Amazon Basics CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury Free – Pack of 4

Plastic, Metal; Imported; DESIGNED TO LAST: 8-year leak-free shelf life; EASY IDENTIFICATION: Engraved with battery model for quick identification

$5.53

Show Instructions

1. Remove the Torx screw at the back of the remote.
2. Remove the back cover by lifting it and moving it forward.
3. Remove the battery from the remote.
4. Install the new battery.
5. Reinstall the back cover and small screw.

To change the battery on this Volvo remote, you will need a CR2430 battery.

SaleBestseller No. 1

2 pack Energizer CR2430 Lithium Coin Button Cell battery

3V, 280mAH, 2 pack; D:24.5mm, H:3.0mm

$4.98

Show Instructions

1. Remove the metal key. You will need to slide the small release on the back of the keyfob.
2. Use the emergency key to pry out the back cover.
3. Remove the old battery.
4. Install the new battery with the + on the back.
5. Close the key fob shell.
6. Reinstall the metal key.

Volvo Key Battery Size

Volvo uses various battery sizes for each key fob. Look at the Volvo pictures in this article. Find your key, and the battery type is listed below each picture.

We hope you find the Volvo Key Fob Battery Replacement Tutorial guide helpful. Check these troubleshooting and repair guides for more help on your Volvo.