Toyota Key Fob Battery Replacement
Learn how to replace the battery in a Toyota key fob. To change the battery in this Toyota key, you will need a CR2025 battery.
Let’s look at how you can replace the battery in one of the most common Toyota key fobs. If your Toyota key fob doesn’t look like the one in this video, we have published more videos below.
Procedure
- Locate the slot on the side of the keyfob. Insert a flat screwdriver and twist it to separate the key housing.

- Remove the housing from inside the key shell. You will see the battery housing that you need to open up.

- Use a screwdriver to pop out the back cover. You will need to push inside all five tabs. They need to be pushed in slightly to allow the black plastic to release.

- Remove the back cover. Slide out the old battery. Install new CR2025 3-volt lithium battery.

- Install the battery shell in reverse order. If the buttons of this remote are worn out, you can replace them while you are at it or even the whole case. A new shell for this remote can be purchased online.
Lastly, here is another video on replacing the battery on a Toyota Camry equipped with a push-start feature.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
How to Start My Toyota with a Dead Key Fob Battery
Your key fob battery can sometimes fail and cause a problem when starting the vehicle. Follow these steps to start a Toyota vehicle with a dead smart key fob battery.
- Place the smart key fob near the Start Stop button.
- Depress the brake pedal.
- Press the Start Stop Button.
These steps can help you start your car, but remember to replace the smart key fob battery as soon as possible to avoid any problems.
The tutorials on this post should cover the steps on how to replace the battery on Camry, Corolla, Starlet, Yaris, Prius, Matrix, Corona, Caldina, Avensis, Avalon, Crown, Celica, MR2, Yaris Ractis, Verso, Previa, Sienna, RAV4, 4Runner, FJ Cruiser, Land Cruiser, Sequoia, Highlander, Venza, Hilux, Tacoma, Tundra. If we missed the instructions on how to change the battery on any Toyota model, please reach out and let us know.
Check these troubleshooting and repair guides for more help on your Toyota.








