Is your Mazda 5 windshield wiper noisy and can’t clean your windshield properly?

Replacing the wiper blades on your Mazda 5 is easy and takes less than 15 minutes. The required wiper blade size for Mazda5 has been listed below.

What you will need

  • Driver size: 26″ wiper blade
  • Passenger Side: 16″ Wiper Blade


  1. Turn on the wipers. Remove the key from the ignition when the wipers are in the upper position. This will make it easier to replace the wipers. how to change wiper blades Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018
  2. Start by changing the wiper blades on the driver’s
    side of your Mazda 5. 
    DIY Replace Wiper Blade ALLMK 2010 2011 2012 2013 2014 2015 2016 2017 2018
  3. Lift the wiper blade. Move the wiper blade up. Be careful and do not let the arm fall on the glass, as this can break the windshield.

    Mazda 5 Wiper Blade Replacement
  4. The wiper blade of your Mazda 5 is locked in place by a small clip. Press on the clip and remove the wiper blade from the wiper arm. 

  5. Turn the wiper blade to remove it from the U-bracket. Align the new wiper blade with the wiper arm. Push the wiper blade in until you hear it lock in place. Once the wiper blade has locked, slowly lower the wiper arm onto the windshield.

  6. Replace the passenger side wiper following the same instructions.

These step-by-step instructions apply to 2010-2018 Mazda 5 minivans. We hope you find the 2010-2018 Mazda 5 Windshield Wiper Blades Replacement guide helpful. Check these troubleshooting and repair guides for more help on your Mazda.

Leave a Reply

Your email address will not be published. Required fields are marked *