2014-2019 Toyota Highlander XU50 – Fog Light Assembly Replacement

Procedure

1. Remove the front bumper. If you need help with this step, follow these procedures for the removal of the front bumper.
   
2. Or remove the screws and bolts on the fender skirt. Then pull the fender skirt and the edge of the front bumper to have access to the screw holding the fog light assembly.
3. On the back of the fog light assembly, remove the screw by turning it counter-clockwise using a Philips screwdriver.
4. Once the screw is removed, pull the fog light assembly out from the front bumper.
5. Line up the new fog light assembly and place it into the front bumper.
6. Install the screw holding the fog light assembly by turning it clockwise using a Philips screwdriver.
7. Reinstall the front bumper. If you need help with this step, follow these procedures for installing the front bumper.
   

Related Products