Honda Civic Driver Airbag Removal
Need to replace your Honda steering wheel airbag? Learn how to replace the steering wheel airbag by following the procedures below.
What you will need
- Honda Airbag
- Torx Socket Set
- 10mm open-end wrench
- Flathead Screwdriver
- Gloves
If your Honda Civic airbag is deployed during an accident, not only do you need to replace the driver’s airbag, but you will also need to clear the airbag light using an SRS OBD2 Scanner.
Sometimes, you may even need to remove the airbag module and send it to a third party to perform SRS Module Reset Service (online marketplaces link), which is often required if hard codes stored in the airbag module can’t be cleared with an airbag scanner.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
I replaced my Honda airbag, but the airbag light won’t reset
A Honda Airbag Scanner is needed to clear the airbag light. In most cases the generic OBD-II scanner cannot read airbag codes and clear them. Airbag fault codes cannot be cleared if crash data is stored in the module.

Check these troubleshooting and repair guides for more help on your Honda Civic.


