Chrysler OBD 2 Port Location
The Chrysler OBD-II (OBD2) port can troubleshoot, read fault codes, view sensor data, and reset warning lights. It is easy to find the OBD2 port on a Chrysler.
At a Glance
- Location: under the driver’s side dashboard, above the brake pedal, left of the steering column.
- Applies to all 1996 and newer Chryslers, from the 300 and Pacifica to the PT Cruiser and Town and Country.
- Crossfire: behind a small plastic cover you pry open.
- Older models: cycling the key on and off three times may show stored codes in the odometer.
- Generic readers show engine codes only; ABS, airbag and body codes need a Chrysler capable scanner.
Where is the OBD2 port located on a Chrysler?

On all 1996 and newer Chrysler vehicles, the OBD2 port is located under the dashboard on the driver’s side. It is above the brake pedal, to the left of the steering column.

Chrysler On-Board Diagnostic II (OBD-II) is used to diagnose vehicle problems.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
The OBD-II diagnosis port and a Multi-System Scanner can diagnose engine, transmission, ABS, Airbag, and other problems.
I can’t find the OBD2 port on a Chrysler.

Look carefully under the dashboard.
On some Chryslers, the OBD-II port is deep under the dashboard, so you may need to slide under it and use a flashlight to locate it. In specific models, such as the Chrysler Crossfire, there is a small plastic cover that you need to pry open to expose the OBD2 port.
Where is the OBD port on a Chrysler 300C located?
The OBD2 port on a Chrysler 300C is on the driver’s side, next to the hood release.
Where is the OBD2 port on a Chrysler Town and Country?
The Chrysler Town and Country OBD2 port can be located under the dashboard on the driver’s side, above the brake pedal.
Where is the OBD2 port on Chrysler Sebring?
The OBD2 port on a Chrysler Sebring can be located under the dashboard on the driver’s side.
What is the difference between OBD, OBD2, and OBD-II?
OBD stands for On-Board Diagnostic System. OBD-II is the correct name, but sometimes it is called OBD2.
Do all Chrysler vehicles have an OBD2 port?
OBD-II is found on all 1996 and newer Chrysler vehicles sold in the US. That means that all Chrysler vehicles 1996 and newer, including Sebring, 300, Town&Country, PT Cruiser, Crossfire, Voyager, 200, LHS, Aspen, Pacifica, Cirrus, Concorde, and 300M have an OBD-II port.
OBD often refers to OBD-I, the earlier system found on Chryslers built from roughly 1985 to 1995. It was manufacturer specific rather than standardized, so an OBD-II scanner will not communicate with those vehicles.
Troubleshooting with YOUCANIC UCAN-II Pro

The YOUCANIC UCAN-II Pro is a perfect example of an OBD-II scanner for troubleshooting your Chrysler. This powerful device can read and clear fault codes from the main systems on supported models, perform bidirectional tests, perform maintenance and repair resets, and perform many more professional-grade functions that can help you determine the cause of the problem in your Chrysler.
Read codes without a scanner on older Chryslers
Chrysler built a diagnostic shortcut into a long run of vehicles, and it costs nothing to try. On many models from the late nineties through the mid two thousands, turning the ignition key from off to on and back three times in quick succession, within about five seconds and without cranking the engine, puts the instrument cluster into a self test and displays any stored trouble codes in the odometer window.
The codes appear one after another as a short sequence, typically ending with a done message. Write them down as they scroll, because the display moves on quickly and the sequence has to be restarted to see them again. The codes shown are the generic five character ones, so a P0171 reads out exactly as you would expect.
It will not work on every model or every year, and it has largely disappeared from newer vehicles, but it takes ten seconds to attempt and on an older Chrysler it will often tell you what you need to know before you have found a scanner.
Newer Chryslers have a Security Gateway
From around the 2018 model year, Chrysler and the other FCA brands fitted a Security Gateway module between the diagnostic socket and the vehicle networks. Reading codes and live data still works normally, but anything that writes to the vehicle is blocked: clearing codes, bidirectional tests, service resets and module programming.
The usual symptom is a scanner that connects perfectly, displays the fault, and then refuses to clear it. Independent shops authenticate through the manufacturer’s service to unlock it, and home mechanics generally use a bypass adapter fitted behind the dashboard. We cover this in more detail in our guide to the Fiat OBD2 port, since the same gateway is used across the group.
If strange electrical faults accompany the problem
One failure is common enough on these vehicles to be worth naming. The Totally Integrated Power Module, usually called the TIPM, is the combined fuse box and power distribution controller found under the hood on many Chrysler, Dodge and Jeep models from roughly 2007 onward. When it develops a fault it produces symptoms that look like several unrelated problems at once: a fuel pump that runs with the ignition off, wipers operating on their own, the horn sounding by itself, a no start, or doors locking and unlocking without input.
People chase these individually for a long time before anyone suspects a single cause. If your vehicle is doing two or more unrelated electrical things it should not, read the codes across all modules before replacing any individual component. A new TIPM from a dealer is expensive and has to be programmed to the vehicle, whereas repairing the original avoids the programming step entirely because the unit coming back is already matched to your car. Specialists such as Module Medics repair modules of this kind on a mail-in basis.
Whatever the symptom, read the codes from every module rather than the engine alone. A basic reader only covers emissions related engine data, which is why it reports nothing while an airbag, ABS or body warning sits on the dashboard. A full system scanner that supports Chrysler specific modules is what reaches the rest.
Newer Chrysler Models and the Security Gateway
From around the 2018 model year, many Chrysler, Dodge, Jeep and Ram vehicles have a security gateway module between the OBD2 port and the rest of the car. You can read codes, but clearing them or running tests needs an authorized connection or a bypass at the gateway.
What to do next: find out if the gateway stands between you and the job
On a Chrysler built from 2018 onward, the connector is only the first door. A security gateway module sits behind it, and while it leaves diagnosis completely alone, it restricts anything written back to the vehicle. That distinction decides what you need to buy.
- Read the car first. Codes, live data and freeze frame are not blocked and never were, so most diagnosis needs nothing special.
- Write down the procedure you are actually trying to perform. Clearing codes, resetting an adaptation, bleeding brakes and running service functions are all writes.
- If it is a write, choose a route for your year and do that before buying hardware, not after.
- Check the model year before you assume any of this applies. An older 300 or Town and Country has no gateway at all.
Our guide to the FCA Chrysler Jeep Dodge Fiat Ram Security Gateway Module Location includes the module location on each Chrysler model and explains what each route involves.
The YOUCANIC UCAN-II Pro reads every module and performs service functions on these vehicles, with a seven day rental for a single repair. What gets through the gateway depends on your year and your chosen route, so email support with your VIN and the procedure before ordering.
When none of this applies to you
Pre gateway cars, and anything that stops at reading a code. That covers most people who come here looking for the socket.
Frequently Asked Questions
Can I read Chrysler codes without a scanner?
On many older Chrysler models, turning the key on and off three times, ending in on, showed engine codes on the odometer. It does not work on all models, and a scanner gives far more detail.
Why can I read codes but not clear them on my newer Chrysler?
That is the security gateway blocking the request. Use a scanner that supports authorized gateway access or connect through a gateway bypass cable.
Will a Bluetooth OBD2 adapter work?
It reads engine codes and basic live data, but not ABS, airbag, transmission or body faults, and it cannot get past the security gateway to clear codes.

