2012 to 2017 Honda Civic Battery Replacement Guide
Is your Honda Civic battery dead and needs to be replaced? Learn how to replace your battery by following the procedures shown below.
At a Glance
- Fits: 2012 to 2015 Civic (North America) and related markets listed below.
- Battery: group size 51R, at least 410 cold cranking amps.
- Tool: a 10 mm wrench; the job takes about 15 minutes.
- Have the radio code ready before you disconnect the battery.
- Negative off first, positive on first, negative on last.
Video
What you will need
- 51R Group Size Battery
- Minimum Cold Cranking Amps: 410A
- 10mm combination wrench
- Battery terminal brush
- Battery terminal protector
Procedure
- Park the vehicle in a safe area and remove the key from the ignition. Set the parking brake.
- Open the hood by pulling the hood release under the dashboard.
- Locate the battery.
- Disconnect the negative battery terminal. Disconnect the positive battery terminal last.
- Remove the bracket that holds the battery in place.
- Remove the old battery and place the new battery in the battery tray.
- Reinstall the battery bracket.
- Clean the battery terminals using a battery terminal brush.
- Connect the positive battery terminal first.
- Connect the negative battery terminal last.
- Spray battery terminal protector to prevent corrosion and improve the connection at the terminals.
Applications
Honda Civic
- 2012 to 2015 (North America)
- 2012 to 2016 (Asia-Pacific)
- 2012 to 2017 (Europe)
- 2014 to 2017 (estate)
Find your radio code before you disconnect anything
Honda radios lock themselves when power is lost and ask for a five digit anti theft code. Sort this out first rather than discovering it in a dark parking lot. The code is often on a card in the glovebox or owner’s manual wallet, and if it is missing you can retrieve it from Honda using the radio serial number and your VIN. On most of these Civics you display the serial by holding the power and preset buttons while switching the ignition on.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
Negative off first, positive on last
Disconnect the negative terminal before the positive and reconnect it last. While the negative is still attached, a wrench slipping off the positive post onto any metal part of the car shorts straight to the battery, which throws sparks and can weld the tool in place. With the negative off there is no return path and it simply cannot happen.
Expect a rough idle for the first few minutes
Honda engine modules learn the idle over time, and losing power wipes that. After reconnecting, let the engine idle for several minutes without touching the throttle and with the air conditioning off so it can relearn. A slightly lumpy or hunting idle during this period is normal and settles on its own. The power windows may also need their auto up function reset, which you do by holding each switch fully up for a few seconds and then fully down.
Clear any codes the dead battery left behind
A battery that went dead or was disconnected often leaves stored faults in modules that lost power, and some of those keep a warning light on long after the car is running normally. A scan tool that reads every module rather than only the engine, such as the YOUCANIC UCAN-II Pro, will show what was logged and let you clear it, so you can tell a leftover from a real fault instead of guessing.
Clean the terminals while you are there
White or blue powder on the posts adds resistance and causes exactly the symptoms people blame on the battery: slow cranking, flickering lights and odd warning messages. Clean the posts and clamps back to bright metal, refit them tight enough that they cannot be twisted by hand, and check the hold down clamp is secure, because a battery that can move will crack its case.
Frequently Asked Questions
What battery does a 2012 to 2015 Honda Civic use?
A group size 51R battery with at least 410 cold cranking amps, as listed above.
Will I need a radio code after changing the Civic battery?
Some Civics ask for an anti theft radio code after the battery is disconnected. Have the code ready before you start; it is often on a card with the owner’s manual.
How long does it take to replace the Civic battery?
About 15 minutes with a 10mm wrench.



What if the car doesn’t start after the new battery is installed?