BMW 5 Series E60 Change Rear Brake Turn Signal Light Bulb
Are your BMW rear turn signal, brake light, and backup bulb not working? Learn how to fix the problem by replacing your BMW’s rear brake, turn signal, and backup light bulb.
This guide provides instructions on replacing the tail light(s) or light bulb(s) on a BMW 5 Series E60 model, 2003 to 2009. These procedures will help you change the brake light, turn signal, and reverse bulb.
What you may need
- Backup Light: 921 Bulb
- Brake Lights: 1156 Bulb
- Turn Signal: PY21W
- Work gloves
Procedure
- Park the vehicle, set the parking brake(s), and open the trunk.
- Remove the plastic retainers that hold the panel in place. You must remove the panel to expose the back of the tail light.

- Press the release tabs on the back of the tail light and remove the housing.

- Install in reverse order. Handle the new bulb carefully, and don’t touch it with bare hands. Use gloves.
Replace the Tail Light Assembly on the BMW E60
To replace the tail light on the BMW 5-series E60, follow the steps above, then remove the four 8mm nuts that secure the tail light. Pull the tail light toward the back to remove it.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
Check these troubleshooting and repair guides for more help on your BMW.




