| › BMW

How to reset BMW oil service reminder

In this guide, you will find instructions on how to reset BMW oil service reminder. 

Instructions

  1. Insert key in the ignition. Press start without pressing the brake pedal. Do not start the engine. 
  2. Wait 5 seconds for any messages to clear. 
  3. Press and hold the ODO Reset button. After 5 seconds you will see the oil or brake symbol on the center of the dashboard. bmw oil service reset instructions

     

  4. RESET or use the stalk on the left of the steering column (CHECK / BC) buttons to scroll to throw the service items. Stop once you see the oil symbol. bmw oil light

     

  5. Once the oil symbol displays on the dashboard, press and hold the ODO reset button for another 5 seconds. 
  6. A message on the dashboard will say RESET? reset bmw oil reminder light

     

  7. Release then press and hold the ODO RESET button again.

NOTE: Oil symbol and Service Vehicle symbol will change from RED to Orage once the reset is completed successfully. 

Reset BMW Oil Light using a Scanner

An alternative method to reset BMW oil light is to use a BMW Specific OBD2 that is capable of performing CBS Reset. Read this article to learn how to perform BMW CBS Service Reset.

This is an example of how to reset BMW oil light using Foxwell Diagnostic Scanner

 

By YOUCANIC on May 12, 2019

Vehicle

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.