Chrysler Crossfire Add Windshield Washer Fluid
This article provides instructions on how to add windshield washer fluid to a Chrysler. This guide is based on the Chrysler Crossfire, but owners of other Chrysler models will find these instructions helpful.
How to Add Windshield Washer Fluid on a Chrysler Crossfire
Procedure
Park the Chrysler on level ground and engage the parking brakes.
Pull the hood release under the dashboard and open the hood.
Locate the windshield fluid reservoir. The washer fluid reservoir on a Chrysler is translucent and has a wiper symbol. 
Open the reservoir cap simply by lifting it.
Add washer fluid until the level gets about two inches below the reservoir cap.
Locate the windshield fluid reservoir. The washer fluid reservoir on a Chrysler is translucent and has a wiper symbol. 
Adding windshield washer fluid to a Chrysler Crossfire takes less than five minutes. We hope you found this guide easy. Feel free to contact us with feedback.
We hope you find the Chrysler Crossfire Add Windshield Washer Fluid guide helpful. Check these troubleshooting and repair guides for more help on your Chrysler.
🔧 Stop paying the dealer for every warning light
Get dealer level diagnostics at home with the YOUCANIC Full System Scanner.
- ✔ Works with all makes and models, including most luxury brands
- ✔ Topology map view shows all vehicle modules on one screen for faster diagnostics
- ✔ Bi directional controls to test fans, pumps, actuators and more so you do not have to guess
- ✔ Special resets and calibrations such as ABS bleed, EPB service, battery registration and more
- ✔ Free lifetime updates with no recurring fees
