Interior Map & Dome Light Bulb Replacement Honda Fit 2007-2013
Is your Honda Fit’s interior light not working? Learn how to fix the problem by replacing your vehicle’s interior light bulbs. This guide provides a step-by-step procedure for replacing the dome light of the 2007-2013 Honda Fit 2nd Gen.
Replacing Honda Map & Dome Light
What you will need
- 12V Festoon 8w light bulb
- Prying tool or flat screwdriver
Procedure
- Unlock the vehicle and go to the front seat.
- Locate the map light near the rearview mirror.
- Remove the lampshade cover by inserting a prying tool or flat screwdriver and using it to push the cover out.
- Remove the light bulb by pulling it out. Use latex gloves.
- Line up the new light bulb and push it in to lock it into place.
- Check the new light bulb by switching it on.
- Line up the lampshade cover and push it until it snaps into place.
- Go to the back seat and locate the dome light on top.
- Remove the lampshade cover using a flat screwdriver or prying tool to pop out the cover.
No subscriptions • lifetime updates🔧 Stop paying the dealer for every warning light
Get dealer level diagnostics at home with the YOUCANIC Full System Scanner.
- ✔ Works with all makes and models, including most luxury brands
- ✔ Topology map view shows all vehicle modules on one screen for faster diagnostics
- ✔ Bi directional controls to test fans, pumps, actuators and more so you do not have to guess
- ✔ Special resets and calibrations such as ABS bleed, EPB service, battery registration and more
- ✔ Free lifetime updates with no recurring fees
- Pull the light bulb out.
- Line up the new light bulb and push it in to lock it into place.
- Check the new light bulb by switching on the dome light.
- Line up the lampshade cover and push it until it snaps back into place.
We hope the Interior Map & Dome Light Bulb Replacement Honda Fit 2007-2013 guide is helpful. Check these troubleshooting and repair guides for more help on your Honda.
