2017+ Nissan Rogue Sport Headlight Assembly Replacement
Is the headlight assembly of your Nissan Rogue broken? Learn how to remove and replace the headlight assembly of your Nissan Rogue by following the procedures below. This guide is a step-by-step procedure for replacing the headlight assembly on a Nissan Rogue Sport 2017+.
At a Glance
- Fits: 2017 to 2023 Nissan Rogue Sport.
- The front bumper must come off first.
- Tools: 10 mm socket and deep socket, and a pick tool for clips.
- Move the bulbs and any connectors to the new assembly and test before refitting the bumper.
- Aim the new headlight before driving at night.
What you will need
- Nissan Rogue Sport Headlight Assembly
- Mechanic Metric Toolset
- 10mm Socket
- 10mm Deep Socket
- Pick Tool
Procedure
- Remove the front bumper. If you need help with this step, follow these procedures for the removal and installation process of the front bumper.
Loosen the 10mm bolt below the headlight assembly by turning it counter-clockwise using a 10mm deep socket.
Remove the three 10mm bolts holding the headlight assembly by turning them counter-clockwise using a 10mm socket.
Pull the cable clip attached below the headlight assembly. Use a pick tool to detach the clip on the lower part of the headlight assembly.
To remove the headlight assembly entirely, disconnect the electrical connectors behind it and pull the cable line clips out of the assembly.
Carry the new headlight assembly near the vehicle.
Push the light bulbs’ electrical connectors into their connection ports and push the cable clips back to the headlight assembly to connect them.

Line up the new headlight assembly to the vehicle and press it in to set it into place.
Reinstall the three 10mm bolts holding the headlight assembly. Turn the bolts clockwise using the 10mm socket to tighten.
Tighten the 10mm bolt below the headlight assembly by turning it clockwise using a 10mm deep socket.
🔧 Find out what is actually wrong before you pay someone to guess
Dealer level diagnostics at home with the YOUCANIC UCAN-II Pro.
- ✔ Covers most makes and models, including many luxury brands. Send us your VIN and we will confirm your car before you order
- ✔ Reads every module, not just the engine, so you find the faults a basic reader says are not there
- ✔ Commands the car: test a fan or pump, bleed ABS, retract an electronic parking brake, register a battery
- ✔ No subscriptions. Free lifetime updates, so the price you pay is the whole price
- ✔ Backed by real mechanics in the USA you can email before and after you buy
Featured in The Wall Street Journal
Reinstall the front bumper. If you need help with this step, follow these procedures for the installation process of the front bumper.
Aim the new headlight
A new headlight assembly has to be aimed after fitting, or it can dazzle oncoming drivers or light too little of the road. Park on level ground about 25 feet from a wall, with normal tire pressures and the fuel tank about half full, and compare the beam height of both sides. Use the adjuster screw on the back of the housing to set it, following the procedure in your owner’s manual, or have a shop check it.
Check these troubleshooting and repair guides for more help on your Nissan.




